Multi-Tech Systems MVP110 Manuel d'utilisateur télécharger pdf (Page 25)

Configure Client MultiVOIPs

match your IP network, select the Frame Type from the

Frame Type list. The Frame Type choices are TYPE_II

and SNAP.

4. In the Port Address group, enter the IP Address and IP

Mask. In the Gateway Address group, enter the gateway

IP address for the client unit.

The IP address is your unique LAN IP address, and the

Gateway address is the IP address of the device

connected to the Internet/Intranet.

Click OK when you are finished. The Channel Setup

dialog box displays.

5. The Channel Setup dialog box defines the voice coder,

fax parameters, and regional telephone parameters for the

voice/fax channel.

6. If you are connecting a station device such as an analog

telephone, a fax machine, or a Key Telephone System

(KTS) to the Voice/Fax connector on the back of the unit.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 35 36

Pas de commentaire

Multi-Tech Systems MVP110 Manuel d'utilisateur Page 25