Multi-tech-systems CF220 Manuel d'utilisateur Page 45
- Page / 84
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
Chapter 4: CallFinder Software Screens
Multi-Tech Systems, Inc. CF220 CallFinder User Guide 45
“Channel Configuration: Channel 1 & Channel 2” Screen Field Definitions (cont’d)
Field Name Values Description
Auto Attendant Delay n= 0, n= 1-255
in seconds
The CallFinder receives calls on the DID line and
then passes them on to the PBX. Some PBXs
have an auto-attendant for directing calls to PBX
extensions. When the CallFinder directs an
incoming call to the PBX it must sometimes wait
some duration for a PBX auto-attendant before
dialing the extension. The Auto Attendant Delay
parameter specifies the length of time that the
CallFinder will wait for the auto attendant in this
context.
For FXS. The CallFinder rings the PBX. The
PBX seizes the line. The CallFinder waits n
seconds before dialing the proper PBX
extension. Use a value of n = 1 second or more.
Default = 2
For FXO. The CallFinder seizes the line from the
PBX. If Auto Attendant Delay value is set to zero
(n= 0), then the CallFinder will listen for dial tone
on the PBX extension line and begin dialing the
extension as soon as dial tone is detected. If n >
0, then the CallFinder waits n seconds before
dialing. Default= 0
Extension Speaker Gain 0 - 255 The degree of amplification that the CallFinder
imposes on the FXS/FXO receive level.
Default = 30
NOTE: This is a very sensitive parameter. In
general, you should not need to change it.
Change this parameter only if necessary and
then very carefully to remedy audio quality
problems. Misadjustment of this parameter can
cause unacceptable degradation of performance.
Update (button) Click on this button to save and activate the
changes to the channel configuration.
- CallFinder 1
- CF220 1
- Table of Contents 3
- Specifications 5
- Safety Warnings 6
- Technical Specifications 7
- Related Manuals 7
- Chapter 2 – Sample System 8
- Internet 10
- Local Telco 12
- Central Office 12
- Technical Parameters 13
- Dan, x5890 14
- Eve, x5176 14
- DID-Channel Modem 15
- Computer 16
- Chapter 2: Sample System 17
- Operator 18
- Conclusion 21
- Installation 22
- You Supply 23
- 6. Do Power-On Test 24
- Ordinary User Parameters 26
- (for CallFinder Phonebook) 26
- 3. Logging In (I) 27
- 6. Logging In (II) 28
- Screens 34
- Login Screen 35
- Call Log Screen 36
- Current Status Screen 37
- Logout Option 38
- Help Screen 38
- Administration Screen 39
- Phone Book Screen 42
- Channel Configuration Screen 44
- Operation 47
- Call Log Email Messages 48
- Introduction 49
- Then click Next 52
- Chapter 7 - FFCF Manager 55
- FFCF Manager Main Screen 57
- FFCF Manager “Edit” Menu 59
- 4. Click Start Update 71
- FFCF Manager screen 72
- Chapter 8: Troubleshooting 77
- 47 CFR Part 68 Telecom 80
- 47 CFR Part 15 Regulation 81
- Fax Branding Statement 81
- Canadian Limitations Notice 82
- Industry Canada 82
Produits connexes et manuels pour Matériel Multi-tech-systems CF220
(189 pages)MAAX 101250-109-001-100 manuels
Manuels d'utilisation et guides de l'utilisateur pour Non MAAX 101250-109-001-100.
Nous fournissons des manuels en pdf 1 MAAX 101250-109-001-100 à télécharger gratuitement par type de document : Guide d'installation
Commentaires sur ces manuels