Multi-tech-systems MT56DSU-S Manuel d'utilisateur télécharger pdf (Page 29)

Appendix

Appendix A - Application Examples

Introduction

This section illustrates several types of applications in which the MT56DSU-S is typically used. These types

include:

 Local Area Data Set

 DDS point-to-point application

 DDS multipoint (polled) application

Local Area Data Set Application

In this application, two pairs of wires provide the connection between two MT56DSU-S devices. The two pairs

can be up to the equivalent of 3 miles of AWG #26 wire at 56 Kbps, or longer for subrate applications.

The figure below depicts a typical Local Area Data Set application.

DTE

Up to 3 miles

of AWG 26 wire

@ 56 Kbps

DTE

DSU

(Requires two pairs

of interconnection wires)

Figure A-1. Local Area Data Set Application

DDS Point-To-Point Application

In this application, the MT56DSU-S provides the interface between the DDS line and the DTE at your site.

Your network provider will provide (at your request) a DDS line connecting the desired locations. The figure

below depicts a sample DDS Point-to-point application.

DTE

DDS

Network

DTE

DSU

Figure A-2. DDS Point-to-Point Application

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 37 38

Pas de commentaire

Multi-tech-systems MT56DSU-S Manuel d'utilisateur Page 29