Multi-tech-systems MTCBA-E Manuel d'utilisateur télécharger pdf (Page 7)

MultiModem EDGE Wireless Modem

Multi-Tech Systems, Inc. Quick Start Guide 7

Note

For automotive applications, you can use permanent “+” or

key-switched “+” according to the type of application.

Connect the power supply to its source (for example, in a

mobile situation, to the vehicle’s DC fuse/terminal block).

Warning

Do not connect your wireless modem directly to a

vehicle’s battery for your power source. Doing so

may cause power spikes. If you wish to use the

battery as a power source, add a filtering device to

the DC input.

Optional – Attach the Modem to Flat Surface

The MultiModem is mounted against a flat surface with the mounting

bracket and two mounting screws. Drill the mounting holes at the

desired mounting location. The mounting holes must be separated

by 125mm (4 -15/16 inches) center-to-center. Slide the mounting

brackets into slot on the back side of the MultiModem chassis.

Attach the MultiModem to the surface with two mounting screws.

1 2 3 4 5 6 7 8

Pas de commentaire

Multi-tech-systems MTCBA-E Manuel d'utilisateur Page 7