Multi-tech-systems MTCBA-G-UF1 Manuel d'utilisateur télécharger pdf (Page 13)

Chapter 2 – Installation

Multi-Tech Systems, Inc. MultiModem® GPRS with USB User Guide 13

Chapter 2: Installation

Mechanical Mounting

To mount the Wireless MultiModem, do the following:

1. Obtain mounting screws (two are needed) that are appropriate for the surface on which you will

mount the MultiModem. For example, one might use two 6-32 self-tapping screws 5/8” in length

to mount the unit in a truck to the wall of the cab behind the passenger’s seat.

2. Typically, the unit is mounted against a flat surface into which holes can be drilled. The

mounting holes (center-to-center) must be separated by 125mm or 4 -15/16 inches.

125 mm

or 4

inches

Mounting Bracket Locations (2)

Spacing of Mounting Screws

Drill the mounting holes at the desired mounting location (if applicable).

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 41 42

Pas de commentaire

Multi-tech-systems MTCBA-G-UF1 Manuel d'utilisateur Page 13