Multi-tech-systems MVP200 Manuel d'utilisateur télécharger pdf (Page 38)

MultiVOIP Quick Start Guide

Remote Site Administrator

3. Unpack your MultiVOIP.

4. Connect one end of the power supply to a live AC outlet

and connect the other end to the Power connection on

your MultiVOIP.

FXSE&M

FXO

PSTN

Ethernet Connection

Power Connection

10BASET

ETHERNET

POWER

Voice/Fax Channel

Connections

E&M

FXO

FXS

Figure 5. Remote Site Cable Connection

5. Connect a network cable to the ETHERNET 10Base-T

(RJ-45) connector on the back of your MultiVOIP.

6. If you are connecting a station device such as an analog

telephone, a fax machine, or a Key Telephone System

(KTS) to your MultiVOIP, connect the smaller end of a

special adapter cable (supplied) to the Voice/Fax Channel

1 FXS connector on the back of the MultiVOIP and the

other end to the station device.

If you are connecting a PBX extension to your MultiVOIP,

connect the smaller end of a special adapter cable

(supplied) to the Voice/Fax Channel 1 FXO connector on

the back of the MultiVOIP and the other end to the PBX

extension.

If you are connecting an E&M trunk from a telephone

switch to your MultiVOIP, connect one end of an RJ-45

phone cord to the Voice/Fax Channel 1 E&M connector

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 44

Pas de commentaire

Multi-tech-systems MVP200 Manuel d'utilisateur Page 38