Multi-tech-systems MVP210-SS Manuel d'utilisateur télécharger pdf (Page 125)

MultiVOIP User Guide Technical Configuration

125

Voice/Fax Parameter Definitions (cont’d) )

Field Name Values Description

Auto Disconnect

Automatic

Disconnect-

ion

-- The Automatic Disconnection

group provides four options which

can be used singly or in any

combination.

Jitter Value 1-65535

milli-

seconds

The Jitter Value defines the average

inter-arrival packet deviation (in

milliseconds) before the call is

automatically disconnected. The

default is 300 milliseconds. A higher

value means voice transmission will

be more accepting of jitter. A lower

value is less tolerant of jitter.

Inactive by default. When active,

default = 300 ms. However, value

must equal or exceed Dynamic

Minimum Jitter Value.

Call

Duration

1-65535

seconds

Call Duration defines the

maximum length of time (in

seconds) that a call remains

connected before the call is

automatically disconnected.

Inactive by default.

When active, default = 180 sec.

This may be too short for most

configurations, requiring upward

adjustment.

Consecutive

Packets Lost

1-65535 Consecutive Packets Lost defines

the number of consecutive packets

that are lost after which the call is

automatically disconnected.

Inactive by default.

When active, default = 30

Network

Discon-

nection

1 to 65535

seconds;

Default =

30 sec.

Specifies how long to wait before

disconnecting the call when IP

network connectivity with the

remote site has been lost.

1 2 ... 120 121 122 123 124 125 126 127 128 129 130 ... 414 415

Commentaires sur ces manuels

Pas de commentaire