Multi-tech-systems ISIHP-2S Manuel d'utilisateur télécharger pdf (Page 50)

Software/Driver Installation

50 MultiModemISI Hybrid Series, ISIHP-2S/2U

ConfigMenu Configuration Utility

Use the ConfigMenu configuration utility with computers using DOS

or Windows 3.x operating systems. ConfigMenu is installed in the

TAs as part of the firmware.

To use ConfigMenu:

1. Start a data communication program and select the COM port

where the TA is connected.

2. In the communication program dialog box, type AT@CONFIG

and press ENTER. ConfigMenus Main Menu appears (see screen

below).

3. To select menu item, type its number and press ENTER. A

submenu then appears where you can make selections. At the

lowest level, you can change a configuration option by selecting a

number or typing a value and pressing ENTER.

4. When you finish, close ConfigMenu.

5. Use the &W command to save your new configuration and to load

it automatically when the TA is turned on.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 62 63

Pas de commentaire

Multi-tech-systems ISIHP-2S Manuel d'utilisateur Page 50