Multi-tech-systems ISIHP-2U Manuel d'utilisateur télécharger pdf (Page 32)

Software/Driver Installation (Windows NT)

32 MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD

12. After the bindings have been reviewed and stored, the message

below appears, click Ye s .

After re-booting, the ISI Cards icon appears in the Control Panel.

ico

You are now ready to configure the terminal adapter. See the

section,Configuring the Terminal Adapter, on page 49.

I/O Addresses and IRQ Codes

Unlike many modem products, the ISIHP has no DIP switch for I/O

addresses and no jumper to determine the IRQ code. The input/output

address and the interrupt request code (IRQ) for the ISIHP are

assigned automatically during driver installation. During any

subsequent re-cofiguring of your PC, you may need to know the

assigned I/O address and IRQ code. To determine the I/O address

and IRQ assigned to the ISIHP:

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 154 155

Pas de commentaire

Multi-tech-systems ISIHP-2U Manuel d'utilisateur Page 32