Multi-tech-systems MT128ISA-UV Manuel d'utilisateur télécharger pdf (Page 19)

Chapter 2 - Installation

MT128ISA/PCI

13. Add your second NDISWAN ISDN device by clicking Add and selecting ISDN-2-

IINWANNT from the list box. Click OK to add this device to the RAS Setup as shown in

figure 2-8.

Figure 2-8. Remote Access Services (RAS) Setup

14. Select the ISDN1 and click Configure to setup Port Usage for this ISDN1port. Depending

upon your use of this channel, select Dial out only, Receive calls only, or Dial out and

Receive calls. Click OK.

Figure 2-9. Configure Port Usage Installation

15. If you choose Dial out only, click OK, and then click the Network tab. Select the protocol

you will use. If you are going to access the Internet, choose TCP/IP.

Figure 2-10. Configure Dial Out Protocol

16. If you Select Receive calls, or Dial out and Receive calls, click OK, then click the Network

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 41 42

Pas de commentaire

Multi-tech-systems MT128ISA-UV Manuel d'utilisateur Page 19