Multi-tech-systems MT202TD 1200 Manuel d'utilisateur télécharger pdf (Page 12)

MT202TD User Guide

Computer or Terminal Connections

Your computer or terminal is connected to the MT202TD via the

modem’s EIA RS-232C / ITU-T V.24 interface connector. This

connector is a standard interface, with a 25-socket female

connection. Therefore, your computer or terminal requires a

standard RS-232C / V.24 cable with a male connector on the

modem end, and a male or female connector at the computer

or terminal end, depending upon the computer or terminal

connector.

Plug the RS-232C / V.24 cable into the RS-232C / V.24 con-

nector on the modem. If screws were provided with your cable,

insert and tighten the screws to secure the connection.

Although the RS-232C / V.24 interface connector is designed

for 25 signal paths, only eight of these signals are used by the

MT202TD.

If your computer or terminal did not come with an RS-232C /

V.24 cable, you may purchase a standard “straight-through”

RS-232C / V.24 cable from your local computer retailer.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 27 28

Pas de commentaire

Multi-tech-systems MT202TD 1200 Manuel d'utilisateur Page 12