Multi-tech-systems MT2834BLR Manuel d'utilisateur télécharger pdf (Page 34)

Chapter 4 - Commands

VALUES: n = 0, 1, 2 or 4

DEFAULT: &C1

DESCRIPTION: &C0 forces Carrier Detect on.

&C1 lets Carrier Detect act normally.

&C2 lets Carrier Detect drop S24 time on disconnect.

&C4 resets modem when Carrier Detect drops.

COMMAND: &CDn

VALUES: n = 0 or 1

DEFAULT: &CD0

DESCRIPTION: &CD0 execute cleardown on disconnect.

&CD1 do not execute cleardown on disconnect.

COMMAND: Ds

VALUES: s = phone #

DEFAULT: n/a

DESCRIPTION: Dial a telephone number “s”, where s may include up to 60

digits or T, P, R, comma and ; characters.

COMMAND: DsNd

VALUES: s = phone # and d = 0 thru 9

DEFAULT: n/a

DESCRIPTION: Store telephone number. To store, enter phone number "s",

followed by N, then Directory Number "d".

COMMAND: &Dn

VALUES: n = 0 thru 3

DEFAULT: &D2

DESCRIPTION: &D0 means DTR is ignored

&D1 means modem returns to command mode.

&D2 lets modem react to DTR normally.

&D3 resets the modem to default parameters.

COMMAND: $Dn

VALUES: n = 0 or 1

DEFAULT: $D0

DESCRIPTION: $D0 disables DTR Dialing.

$D1 enables DTR Dialing.

COMMAND: %DF

VALUES: n = 0 or 1

DEFAULT: %DF0

DESCRIPTION: %DF0 selects V.34 Line Probe Data in Graph Format.

%DF1 selects V.34 Line Probe Data in Table Format.

COMMAND: %DP

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 89 90

Pas de commentaire

Multi-tech-systems MT2834BLR Manuel d'utilisateur Page 34