Multi-tech-systems MultiConnect Adapter Manuel d'utilisateur télécharger pdf (Page 14)

Chapter 6 – Flash Upgrade

Multi-Tech Systems, Inc. MultiConnect Serial-to-Serial Adapter User Guide (S000354B) 14

Chapter 6 – Flash Upgrade

Introduction

The MultiConnect Adapter contains a 2 MB flash wherein the boot image, the firmware and configuration files are

stored in a compressed format.

Serial Flash Upgrade Scenario

Following steps explain the procedure to upgrade a flash using the serial COM port (serial flash upgrade).

Connect the MultiConnect Adapter to a PC COM Port.

• Open an application through which we can access the serial device(e.g., Meterm, zoc, hyperterm).

• Reboot the MultiConnect Adapter.

• Wait for the boot message and prompt “press d to download” to appear.

• Press d when prompted.

• Select the XMODEM Protocol from the Terminal application.

• Choose a file (MTXCSEM-TFTP-…) file to be uploaded.

• Perform a file upload.

The MultiConnect Adapter reboots and will be up after a few seconds (10-15 secs).

The MultiConnect Adapter reboots after it has been successfully upgraded.

1 2 ... 9 10 11 12 13 14 15 16 17 18

Pas de commentaire

Multi-tech-systems MultiConnect Adapter Manuel d'utilisateur Page 14