Multi-tech-systems MVPFX2-2 Manuel d'utilisateur télécharger pdf (Page 60)

Technical Configuration MultiVOIP FX User Guide

Telephony Interface Parameters

The following parameters must be known about the PBX or telco central office equipment to which the

analog MultiVOIP will connect:



Phone Parameters

Ask phone company or

telecom manager.

Telephony Interface Parameters:

Record for this VOIP Site

• Which interface type is to be used?

FXS_____ FXO_____

• If FXS, determine whether the line will be used for a

phone, fax, or KTS (key telephone system)

• If FXO, determine if line will be an analog PBX

extension or an analog line from a telco central office

Config Info CheckList

Type of Configuration

Info Gathered

MultiVOIP

Configuration

screen on which

to enter the Info

Info

Obtained

√

Info

Entered

√

IP Info for voip unit

● IP address

● Gateway

● DNS IP (if used)

IP Parameters

Interface Type

(Choices: FXS, FXO)

*In FXO/FXS systems,

channels used for phone,

fax, or key system are

FXS; channels used for

analog PBX extensions or

analog telco lines are

FXO.

Interface

Parameters.

Country Code Regional

Parameters

Reminder: Be sure to Save & Apply after entering configuration values.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 192 193

Commentaires sur ces manuels

Pas de commentaire

Multi-tech-systems MVPFX2-2 Manuel d'utilisateur Page 60

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Multi-tech-systems MVPFX2-2