Multi-tech-systems MT2834ZPX Manuel d'utilisateur télécharger pdf (Page 37)

Chapter 4 - AT Commands, S-Registers and Result Codes

COMMAND: ;(Semi-Colon)

VALUES: n/a

DEFAULT: n/a

DESCRIPTION:

Causes return to Command Mode after dialing.

COMMAND: ! (Exclamation)

VALUES: n/a

DEFAULT: n/a

DESCRIPTION

Causes modem to flash On-Hook.

COMMAND: @

VALUES: n/a

DEFAULT: n/a

DESCRIPTION

Causes modem to wait for ringback, then 5 seconds of

silence before processing next part of command.

COMMAND: +++AT<CR>

VALUES: n/a

DEFAULT: n/a

DESCRIPTION

In-band Escape Sequence. Places modem in Command

mode while still remaining On-Line. Enter +++ followed

by the letters A and T, up to ten command characters, and

a RETURN.

COMMAND: BREAK AT<CR>

VALUES: n/a

DEFAULT: n/a

DESCRIPTION:

Out-of-band Escape Sequence. Places modem in Com-

mand mode while still remaining On- Line. Not preceded by

AT. Enter a BREAK signal, followed by the letters A and T,

up to sixty command characters, and hit RETURN.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 80 81

Pas de commentaire

Multi-tech-systems MT2834ZPX Manuel d'utilisateur Page 37