Multi-tech-systems MT3334ZDX Manuel d'utilisateur télécharger pdf (Page 26)

MT3334ZDX/V Owner's Manual

Garbage Characters on the Monitor

• Your computer and the remote computer may be set to different word

lengths, stop bits, or parities. If you have connected at 8-N-1, try

changing to 7-E-1, or vice-versa, using your communications software.

• You may be experiencing line noise. Enable error correction, if it is

disabled, or hang up and call again; you may get a better connection.

• At speeds above 2400 bps, the remote modem might not use the

same transmission or error correction standards as your modem. Try

connecting at a slower speed or disabling error correction. (With no

error correction, however, line noise can cause garbage characters.)

• Try entering the

(View Parameters) command, making a screen

print of the diagnostics listing, and checking for parameters that may

be unacceptable.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 70 71

Pas de commentaire

Multi-tech-systems MT3334ZDX Manuel d'utilisateur Page 26