Multi-tech-systems MVPFX2-2 Manuel d'utilisateur télécharger pdf (Page 150)

Operation and Maintenance MultiVOIP FX User Guide

150

To transfer files using the FTP server functionality in the MultiVOIP, follow these directions.

1. Establish Network Connection and IP Addresses. Both the controller PC and the MultiVOIP unit(s)

must be connected to the same IP network. An IP address must be assigned for each.

IP Address of Control PC ____ . ____ . ____ . ____

IP Address of voip unit #1 ____ . ____ . ____ . ____

IP address of voip unit #n ____ . ____ . ____ . ____

2. Establish User Name and Password. You must establish a user name and (optionally) a password for

contacting the voip over the IP network. (When connection is made via a local serial connection between

the PC and the voip unit, no user name is needed.)

As shown above, the username and password must be set in the web GUI.

1 2 ... 145 146 147 148 149 150 151 152 153 154 155 ... 192 193

Pas de commentaire

Multi-tech-systems MVPFX2-2 Manuel d'utilisateur Page 150