Multi-tech-systems RF500S Manuel d'utilisateur télécharger pdf (Page 125)

125

Appendix

Appendix B - Tools for your RF500S

RouteFinder Monitor

If you are having problems, the RouteFinder Monitor can be a valuable tool to assist in

troubleshooting. Additional troubleshooting information is available through the on-line help screens.

Refer to Chapter 6 for more information about using the RouteFinder monitor.

PING

Ping is an acronym for Packet Internet Groper. The PING utility is used as a diagnostic tool to

determine if a communication path exists between two devices on the network. The utility sends a

packet to the specified address and then waits for a reply. PING is used primarily to troubleshoot

Internet connections, but it can be used to test the connection between any devices using the TCP/IP

protocol.

WINIPCFG and IPCONFIG

There are two tools which are helpful in finding a computer’s IP configuration, MAC address and

default gateway.

WINIPCFG (for Windows 95/98)

1. Select Start | Run and type winipcfg.

2. The IP address, default gateway (the RF500S IP address), and the MAC (adapter address)

display.

IPCONFIG (for Window NT/2000)

1. From a DOS Prompt, type IPCONFIG and press Enter.

2. The IP address, default gateway (the RF500S IP address), and the MAC (adapter address)

display.

1 2 ... 120 121 122 123 124 125 126 127 128 129 130 ... 133 134

Pas de commentaire

Multi-tech-systems RF500S Manuel d'utilisateur Page 125