Multi-tech-systems MTASR1-100 Manuel d'utilisateur télécharger pdf (Page 113)

Chapter 6 - Configuration Examples

113

In the RouteFinder

100

Setup dialog box click on the WAN button.

12. The WAN Port Setup dialog box is displayed with the Port Enabled, Mode set for Asynchronous, and the

Connection Method set to Direct Connect/Leased Line and Answering.

With a dial-up line and an async modem, the Mode needs to be Asynchronous (the default) and the

Connection Method needs to be either Answering or Dialing. For the Chicago site it needs to be Dialing.

With a leased line, the Mode needs to be Synchronous and the Connection Method needs to be Direct

Connect/Leased Line.

For a dial-up connection, perform steps 13,14,and 15 and then skip to step 17.

For a leased line connection, skip to step 16.

13. Change the Connection Method to Dialup by clicking on the Dialing check box.

For the Chicago LAN, the WAN Port Setup dialog box should have the following fields checked:

Port Enable

Asynchronous

115200

Dialing

14. Click on the Advanced button to display the WAN General Setup dialog box.

1 2 ... 108 109 110 111 112 113 114 115 116 117 118 ... 206 207

Pas de commentaire

Multi-tech-systems MTASR1-100 Manuel d'utilisateur Page 113