Multi-tech-systems MTASR1-100 Manuel d'utilisateur télécharger pdf (Page 127)

Chapter 6 - Configuration Examples

127

With a dial-up line and an async modem, the Mode needs to be Asynchronous (the default) and the

Connection Method needs to be either Answering or Dialing. For the St. Louis site it needs to be Dialing.

With a leased line, the Mode needs to be Synchronous and the Connection Method needs to be Direct

Connect/Leased Line.

For a dial-up connection, perform steps 14,15,and 16 and then skip to step 18.

For a leased line connection, skip to step 17.

14. Change the Connection Method to Dialing by clicking on the Dialing check box.

For the St. Louis LAN, the WAN Port Setup dialog box should have the following fields checked:

Port Enable

Asynchronous

115200

Dialing

15. Click on the Advanced button to display the WAN General Setup dialog box.

16. Click on the Modem Types drop down text box and click on your modem type. If your WAN device is not

listed in this text box, click on the Add Modem button to display the Modem Types dialog box.

1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 206 207

Pas de commentaire

Multi-tech-systems MTASR1-100 Manuel d'utilisateur Page 127