Multi-tech-systems MVP200 Manuel d'utilisateur télécharger pdf (Page 17)

Configure Host MultiVOIP

11. The IP Protocol Default Setup dialog box displays.

The default Frame Type is TYPE_II. If this does not match

your IP network, change the Frame Type by selecting SNAP

from the Frame Type list. The available Frame Type choices

are TYPE_II and SNAP.

12. In the Ethernet group, enter your unique LAN IP address in

the IP Address box, then enter the Subnet Mask and

Gateway Address for your LAN in the corresponding

boxes.

The IP address is your unique LAN IP address, and the

Gateway address is the IP address of the device

connecting your MultiVOIP to the Internet.

Click OK when you are finished.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 43 44

Pas de commentaire

Multi-tech-systems MVP200 Manuel d'utilisateur Page 17