Multi-tech-systems MVP200 Manuel d'utilisateur télécharger pdf (Page 18)

MultiVOIP Quick Start Guide

13. The Channel Setup dialog box displays. It is used to

define the voice/fax channel interface, voice coder, fax

parameters, billing options, security settings, and regional

phone parameters (tone pairs) for each channel.

Configure each channel for the type of interface you are

connecting to. To change the channel number, select the

channel you want to configure from the Select Channel

list.

14. The Interface group defaults to FXS (Loop Start). Select

the interface option to correspond to the interface type

being connected to the Voice/Fax connector on the back

panel of the MultiVOIP.

If you are connecting a station device such as an analog

telephone, a fax machine, or a Key Telephone System

(KTS) to the Voice/Fax connector on the back of the unit,

FXS (Loop Start) will likely be the correct Interface option

most of the time.

If the station device uses ground start, then choose the

FXS (Ground Start) option. Refer to the device’s user

documentation.

If you are using an extension from your PBX, then choose

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 43 44

Pas de commentaire

Multi-tech-systems MVP200 Manuel d'utilisateur Page 18