Multi-tech-systems RouteFinder RF550VPN Manuel d'utilisateur télécharger pdf (Page 11)

Chapter 3 – Configuring the PC

6. The TCP/IP Properties window displays. Click the IP Address tab to set your

workstation’s IP Address.

7. In the IP Address dialog box, choose one of the following:

· To set a Dynamic IP Address, check Obtain an IP Address Automatically.

Dynamic Addresses are used in the Example Reference Guide in Example 2

– Site B and Example 3 – Site B.

· To set a Fixed IP Address, check Specify an IP address. Fixed Addresses

are used in all the examples in the Example Reference Guide, except the two

mentioned above. For our example, set the address to 192.168.2.x.

Click OK.

8. You have completed the client settings. Click OK to close out of the Network Control

Panel.

9. Windows will ask you to restart the PC. Click the Yes button.

Note: Repeat these steps for each PC on your network.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 31 32

Pas de commentaire

Multi-tech-systems RouteFinder RF550VPN Manuel d'utilisateur Page 11