Multi-tech-systems MT5600ZDX Manuel d'utilisateur télécharger pdf (Page 41)

Owners Manual

Command: -Kn MNP 10 MNP Extended Services

Values: n = 0, 1, or 2

Default: 0

Description: -K0 Disables V.42 LAPM to MNP 10 conversion.

-K1 Enables V.42 LAPM to MNP 10 conversion.

-K2 LAPM answer mode detection phase.

Command: -Qn MNP 10 Enable Fallback to V.22 bis/V.22

Values: n = 0 or 1

Default: n/a

Description: -Q0 n/a

-Q1 n/a

*This command is included only for compatibility and performs no

function.

Command: -SEC=n Enable/Disable MNP10-EC

Values: -SDR=n

Default: n/a

Description: -SEC=0 Disables MNP 10-EC

-SEC=1 Enables MNP 10-EC

* -SEC=1,[<tx level>] where <tx level> is an optional transmit level

subparameter (transmit level range is 0 dBm to -30dBm and is specified by

a set S 91 value).

Command: @Mn MNP 10 Initial Cellular Power Level Setting

Values: n = 0-30

Default: n/a

Description: @M0n/a ... @M30 n/a

*This command is included only for compatibility and performs no

function.

Command: :En MNP 10 Compromise Equalizer Enable Command

Values: n = 0 or 1

Default: n/a

Description: :E0 n/a

:E1 n/a

*This command is included only for compatibility and performs no

function.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 83 84

Pas de commentaire

Multi-tech-systems MT5600ZDX Manuel d'utilisateur Page 41